Home / LED Street Light

LED Street Lights — 30W to 300W, IP66

Die-cast aluminium LED street lights with 150-170 lm/W efficacy, tool-free maintenance and a 5-year warranty. Grid-powered lighting for municipal roads, industrial roads and retrofits.

OVERVIEW

About this product

Our LED street light range covers 30W to 300W in die-cast aluminium housings, with a modular optical design so a failed module can be replaced without touching the pole or the wiring.

Most of our export orders are retrofit projects replacing 250W-400W high-pressure sodium lamps. A 100W LED unit typically matches a 250W HPS on the road while cutting energy use by about 60% — the payback calculation is on the specs below.

SPECIFICATIONS

Technical parameters

Standard range below. Anything outside it can be produced to order.

Power	30W / 50W / 60W / 80W / 100W / 150W / 200W / 300W
Luminous efficacy	150-170 lm/W
LED chip	Bridgelux / Lumileds / Sanan (optional)
Driver	Meanwell or Inventronics, 0-10V / DALI dimming
Body	Die-cast aluminium, anti-corrosion coating
Protection	IP66, IK09, 10kV surge
Beam angle	Type II / III / IV, 60°/90°/120° optional
Lifetime	50,000 h (L70)
Warranty	5 years

ADVANTAGES

Why projects choose this

Real 150+ lm/W at the fixtureMeasured at the complete luminaire, not just the bare LED chip — what actually reaches the road.

Modular maintenanceEach LED module and the driver are field-replaceable with a screwdriver, so a single failure never takes a whole street offline.

HPS retrofit readyWe calculate the equivalent wattage and mounting height from your existing poles, so you keep the pole and change only the head.

Smart control optionalPhotocell, timer, 0-10V dimming, or a full remote-management gateway with energy metering.

APPLICATIONS

Where it is used

Municipal and county roads
Industrial roads and ports
Campus and park roads
HPS/LED retrofit projects
Tunnels and underpasses

FAQ

Frequently asked questions

What wattage replaces a 250W sodium lamp?

Normally 80W-100W LED gives equal or better road illuminance, depending on mounting height and pole spacing. Send us your road cross-section and we will run the dialux check.

Do you supply the driver separately?

No, the driver is integrated and matched to the luminaire. Meanwell or Inventronics are available on request.

Is the photocell included?

Optional. NEMA socket or built-in photocell both available.

Can it work on 277V or 347V?

Yes, wide-voltage drivers 100-305V AC are standard; 347V available for North America on request.

Need a quote for your project?

Send us your road width, pole height, quantity and site photos — we will come back with a configuration and price within one working day.

Request a quote Call 131 6040 3080